Chapter 7 - How to Install ClassAct - (used for NewIcons and Aweb)

Back to Home | Workbench 3.1 Guide Contents | Site Map

In this chapter we will Install ClassAct which is required for the 'NewIcons V4.6 installer' program (Chapter 8 - Method 2) and 'AWeb' (Chapter 12)

a. Please make sure you have downloaded and copied classact2demo.lha to C:\Program Files\WinUAE\Hard Disks\Programs directory.

b. Next re-launch the WinUAE program, left click the config you made, click the Load button and click OK/Start to start emulation.

c. When workbench has booted, double click System, double click the next System drawer in the window that opened, and then double click Shell to open Amiga DOS.

d. Now we’ll extract the classact2demo.lha archive, So type:

lha x programs:classact2demo.lha programs: and press Return/Enter

e. Type in: endcli and press Return/Enter and close all open windows.


Install ClassAct:

1. After bootup double click Programs, double click on ClassAct directory, then double click Install_Classes.

2. Select Intermediate User and then click on Proceed With Install

3. Make sure Install for Real and None are selected and then Click ‘Proceed’.

4. Click ‘Proceed’. (It should show SYS:Classes as selected drawer).

5. Click on Yes.

6. Click ‘Proceed’.

7. Click ‘Proceed’.

8. Click ‘Proceed’ to end Install.

9. Now restart the Amiga by holding down the 3 keys:

CTRL + LEFT WINDOW + RIGHT WINDOW keys (or press CTRL + INSERT + HOME in older versions of WinUAE) Or, you could just press F12 then click reset on bottom left.

Back

Back to Home | Workbench 3.1 Guide Contents | Site Map

Next

Copyright (c) Paul, The Green Amiga Alien. 

Last Updated: April 2006