Chapter 6 - How to Install MUI

Back to Home | Workbench 3.1 Guide Contents | Site Map

In this chapter we will Install and set-up MUI.

a. Please make sure you have downloaded and copied mui38usr.lha to C:\Program Files\WinUAE\Hard Disks\Programs directory.

b. Next re-launch the WinUAE program, left click the config you made, click the Load button and click OK/Start to start emulation.

c. When workbench has booted, double click System, double click the next System drawer in the window that opened, and then double click Shell to open Amiga DOS.

d. Now we’ll extract the mui38usr.lha archive, So type:

lha x programs:mui38usr.lha programs: and press Return/Enter

e. Type in: endcli and press Return/Enter and close all open windows.


Install MUI:

1. Double Click Programs.

2. Double Click on MUI directory.

3. Double Click Install-MUI.

4. Make sure Intermediate User is selected and then Click ‘Proceed With Install.’

5. Make sure Install for Real and None is selected and then Click ‘Proceed’.

6. Click ‘Proceed’.

7. Click ‘Show Drives’ button and click on DH0: System:

8. Click ‘Proceed’.

9. Click ‘Proceed’.

10. Click ‘Proceed’.

11. Click No as the examples are not needed. (click Yes if you want the examples)

12. Click ‘Proceed’.

13. We have now Installed MUI. Now restart the Amiga by holding down the 3 keys:

CTRL + LEFT WINDOW + RIGHT WINDOW keys (or press CTRL + INSERT + HOME in older versions of WinUAE) Or, you could just press F12 then click reset on bottom left.

14. Double Click System, double click on the MUI directory and double click on the MUI Icon.

15. Next go to the top of the screen and hold down your right mouse button.

16. Hover you mouse over Project and Open.... When Open... is highlighted let go of right mouse button.

17. Click Stuntzi.prefs and click ok.

18. Click Save.


Troubleshooting:

Help! When trying to install MUI, I receive the following error: "COPYLIB: Can't open file " " in line 299 DOS Error Type: unable to locate a file or drawer"

Solution: Make sure you have Installed v33 of the Installer tool. Also try decompressing the mui38usr.lha archive into RAM and install from there.

a. Double click System, double click the next System drawer in the window that opened, and then double click the Shell program to open Amiga DOS.

b. Type in:

lha x programs:mui38usr.lha ram: and press Return/Enter.

Back

Back to Home | Workbench 3.1 Guide Contents | Site Map

Next

Copyright (c) Paul, The Green Amiga Alien. 

Last Updated: April 2006